How to replace brake light bulb for Audi A6 (C7)
Model years: 2011 - present
Brake light is a beam of light at the rear-end of the vehicle, which lights up in red each time brakes are used. In other words, it is the sign, that the driver is intended to reduce the speed or will discontinue rolling at all. Confirming brake lights are in a good condition is a critical concern to make sure slowing down the vehicle is easily observable by others. As a consequence of burned out brake light bulb, the driver from behind might not foresee facing car is slowing down , consequently road accident or even multiple crash can occur. If the brake light has gone out, the bulb should be replaced straightway. When preparing to repair failed brake light, assure you buy an appropriate bulb.
The life-time of a bulb is limited. Sooner or later, it will burn out and will have to be replaced. Bulbs, made of high quality materials, tend to last longer. It's recommended to use well known brand replacement bulbs.
If bulb burns out right after installation, your vehicle might have a problem inside electrical system - have it checked by auto electrician.
Audi A6 brake light bulb list:
| Body type | Position | Bulb specs | Buy |
|---|---|---|---|
| Sedan/saloon | Brakelight | Type: Single Filament Bulb (P21W) Voltage / Watts: 12V/21W | Amazon.com: $7.46pair Amazon.co.uk: £5.94pair |
| Avant | |||
| Brakelight | Type: Single Filament Bulb (P21W) Voltage / Watts: 12V/21W | Amazon.com: $7.46pair Amazon.co.uk: £5.94pair |
How to replace brake light bulb:
1.
Open the trunk.
2.
Remove rear lights cluster cover.
3.
Pull out the lights assembly.
4.
Locate brake light bulb.
5.
Remove old bulb.
6.
Insert the replacement bulb.
7.
Apply rear lights cluster back.
8.
Apply rear lights cluster cover.
9.
Test if brake lights work.
