How to replace headlight bulb for Audi A6 (C7)
Model years: 2011 - present
To make sure you are fully visible on the road it's advisable to examine if the headlights are functioning properly. Usually breakdown of the headlight is caused by burned out bulb, reducing the field of vision of the roadway at dusk times. Despite that your vehicle might become more difficult to notice for the other road users. If you became aware of the fact, that the headlight does not light up, changing the bulb is a must. Before repairing failed headlight, assure you acquire proper bulb. If managed to spot headlight failure on somebody's vehicle, don't be apathetic and inform the driver about it. The accident can be avoided.
The life-time of a bulb is limited. Sooner or later, it will burn out and will have to be replaced. Bulbs, made of high quality materials, tend to last longer. It's recommended to use well known brand replacement bulbs.
If bulb burns out right after installation, your vehicle might have a problem inside electrical system - have it checked by auto electrician.
Tip: Never touch glass housing of a halogen bulb with your fingers. Greasy spots might cause premature failure of the bulb. Handle the bulb by its base or use a piece of clean paper when installing.
Audi A6 headlight bulb list:
| Body type | Position | Bulb specs | Buy |
|---|---|---|---|
| Sedan/saloon | High beam | Type: Halogen (H15) Voltage / Watts: 12V/15/55W | Amazon.com: $18.78pack of 1 $24.99pair Amazon.co.uk: £17.50pack of 1 |
| Low beam | Type: Halogen (H7) Voltage / Watts: 12V/55W | Amazon.com: $5.74pack of 1 $6.97pair Amazon.co.uk: £4.88pack of 1 £6.99pair | |
| Avant | High beam | Type: Halogen (H15) Voltage / Watts: 12V/15/55W | Amazon.com: $18.78pack of 1 $24.99pair Amazon.co.uk: £17.50pack of 1 |
| Low beam | Type: Halogen (H7) Voltage / Watts: 12V/55W | Amazon.com: $5.74pack of 1 $6.97pair Amazon.co.uk: £4.88pack of 1 £6.99pair |
How to replace headlight bulb:
1.
Open the hood.
2.
Disconnect the headlight's wiring that supplies power to a bulb (usually no tools are needed, use you hands).
3.
Remove the bulb cover by turning it counter-clockwise till it can be easily pulled out.
4.
Swing open the bulb retention clip by gripping and pressing it using your fingers.
5.
Remove old headlight bulb.
6.
Insert the replacement bulb regarding the notches on both, the holder and the bulb itself. Do not touch the glass part of the bulb as it might fail prematurely.
7.
Attach bulb retention clip.
8.
Apply bulb cover back.
9.
Plug the wiring back in.
10.
Test if headlights work.
