How to replace headlight bulb for Audi A6 (C6)
Model years: 2004 - 2011
For complete visibility on the road it's suggested to verify the condition of headlights. Primarily decayed bulb is a ground for an unworkable headlight, what will result in reduced road visibility at dusk times. Also your car may be obscure for the other drivers. If you noticed, that the headlight has failed, changing the bulb is a must. Before repairing failed headlight, make sure you have adequate bulb. If managed to spot headlight failure on somebody's vehicle, if you have a chance, give the driver a notice. You will be appreciated.
The life-time of a bulb is limited. Sooner or later, it will burn out and will have to be replaced. Bulbs, made of high quality materials, tend to last longer. It's recommended to use well known brand replacement bulbs.
If bulb burns out right after installation, your vehicle might have a problem inside electrical system - have it checked by auto electrician.
Tip: Never touch glass housing of a halogen bulb with your fingers. Greasy spots might cause premature failure of the bulb. Handle the bulb by its base or use a piece of clean paper when installing.
Audi A6 headlight bulb list:
| Body type | Position | Bulb specs | Buy |
|---|---|---|---|
| Sedan/saloon | High beam | Type: Halogen (H1) Voltage / Watts: 12V/55W | Amazon.com: $19.75pack of 2 Amazon.co.uk: £6.52pack of 1 £11.45pair |
| High beam | Type: Halogen (H15) Voltage / Watts: 12V/15/55W | Amazon.com: $18.78pack of 1 $24.99pair Amazon.co.uk: £17.50pack of 1 | Low beam | Type: Halogen (H7) Voltage / Watts: 12V/55W | Amazon.com: $5.74pack of 1 $6.97pair Amazon.co.uk: £4.88pack of 1 £6.99pair |
| Avant | |||
| High beam | Type: Halogen (H1) Voltage / Watts: 12V/55W | Amazon.com: $19.75pack of 2 Amazon.co.uk: £6.52pack of 1 £11.45pair | High beam | Type: Halogen (H15) Voltage / Watts: 12V/15/55W | Amazon.com: $18.78pack of 1 $24.99pair Amazon.co.uk: £17.50pack of 1 |
| Low beam | Type: Halogen (H7) Voltage / Watts: 12V/55W | Amazon.com: $5.74pack of 1 $6.97pair Amazon.co.uk: £4.88pack of 1 £6.99pair |
How to replace headlight bulb:
1.
Open the hood.
2.
Disconnect the headlight's wiring that supplies power to a bulb (usually no tools are needed, use you hands).
3.
Remove the bulb cover by turning it counter-clockwise till it can be easily pulled out.
4.
Swing open the bulb retention clip by gripping and pressing it using your fingers.
5.
Remove old headlight bulb.
6.
Insert the replacement bulb regarding the notches on both, the holder and the bulb itself. Do not touch the glass part of the bulb as it might fail prematurely.
7.
Attach bulb retention clip.
8.
Apply bulb cover back.
9.
Plug the wiring back in.
10.
Test if headlights work.
