How to replace brake light bulb for BMW X5 five-door SUV (E70)
Model years: 2006 - 2013
Brake light is a luminous signal situated at the rear light cluster of the car, that illuminates in red every time driver applies brakes. Generally, it is an indication, that the vehicle is expected to slack up or will discontinue rolling at all. Appropriate condition of brake lights is very important to make sure that other drivers could deftly react to your actions. Supposing brake lights are not working, the driver from behind might not foresee facing car is slowing down , leading to rear-end damage. When noticed, that no red beam comes from any of brake lights, be sure you replace the bulb as soon as possible. Prior to fixing dead brake light, be sure you have an adequate bulb.
The life-time of a bulb is limited. Sooner or later, it will burn out and will have to be replaced. Bulbs, made of high quality materials, tend to last longer. It's recommended to use well known brand replacement bulbs.
If bulb burns out right after installation, your vehicle might have a problem inside electrical system - have it checked by auto electrician.
BMW X5 brake light bulb list:
| Body type | Position | Bulb specs | Buy |
|---|---|---|---|
| Five-door SUV | Brakelight | Type: Single Filament Bulb (W16W) Voltage / Watts: 12V/16W | Amazon.com: $6.99pair Amazon.co.uk: £3.48pair |
How to replace brake light bulb:
1.
Open the trunk.
2.
Remove rear lights cluster cover.
3.
Pull out the lights assembly.
4.
Locate brake light bulb.
5.
Remove old bulb.
6.
Insert the replacement bulb.
7.
Apply rear lights cluster back.
8.
Apply rear lights cluster cover.
9.
Test if brake lights work.
